Lisbon Services

AXLE, CV JOINT, DRIVESHAFT REPAIR

There are signs to look for when determining when to schedule an inspection of your vehicle’s front axle, rear axle, CV joints, and driveshaft components. Clunking or clicking noises are signs that a CV joint needs replacement. Vibrations during acceleration may indicate a damaged driveshaft, though they may also point to an axle issue depending on the layout of your vehicle. Turning and steering issues may also arise out of a problem with the driveshaft. CV joints can go bad when the grease leaks out of a damaged CV boot. There are various determinants for how quickly your vehicle’s axle, CV joint, and driveshaft components will degrade over time. If you would like to learn more about the intervals between repairs for front wheel drive axles, main driveshafts, CV joints, U-joints, yokes, and other axle assembly components, then contact us today.

BELTS & HOSES

When compared to other components in your car, belts and hoses have one of the shortest life spans. These items are constantly exposed to engine heat, vehicle vibrations, and harmful chemicals, which all have the potential to cause cracks and leaks. Some symptoms to be aware of for belts and hoses nearing failure include squeaking, screeching, or grinding noises that begin when starting your engine or appear during vehicle operation. It’s worth noting that grinding sounds near belts are usually associated with a bad pulley bearing rather than the belt itself, as the pulley bearing may freeze up and ultimately lead to a belt replacement. Other symptoms of a bad belt or hose include loss of power, leaking coolant or other fluids, illuminated dashboard lights, rising steam from the engine, and air conditioning failure. While routine maintenance of belts and hoses is always important, summertime is an especially important season to keep an eye under the hood due to increased temperatures, which will accelerate deterioration of the rubber components. Since belts and hoses can be difficult to inspect visually, be sure to follow your manufacturer’s recommendations for scheduled maintenance.

BRAKE REPAIR

Bad brakes display warning signs for impending brake maintenance. For example, if your brakes squeal or grind when in use, then your brake pads may be worn and require replacements. If your vehicle pulls to one side when braking, then this may point to worn brakes, a malfunctioning caliper, or low brake fluid in the brake lines. If your brake pedal presses down too easily—also known as “spongy” brakes—then this may be an indication of too much air in the hydraulic brake lines. Sometimes, your vehicle’s electronic diagnostic system will alert you to a potential brake issue by a service indicator light on the dashboard. While these are only some of the most common signs of potential problems with your vehicle’s brake system, noticing these signs of faulty brakes and seeking out a brake service can save you money down the line. Our staff is trained in maintaining and servicing front and rear brake systems and all accompanying brake system components like brake pads, brake shoes, parking brakes, rotors, drums, and hydraulic systems. If you experience any of the above signs or symptoms of bad brakes, like unusual squealing or grinding noises, then contact us online or call us today to have your brakes inspected immediately.

COOLING SYSTEM REPAIR

Over time, antifreeze breaks down and loses its efficiency. If not drained and replaced, old antifreeze can lead to corrosion. During a cooling system flush and fill, our staff will drain the antifreeze from the radiator, flush the cooling system, and fill the radiator with new antifreeze. The cooling system’s cooling fan circulates air through the radiator and passes excess heat out of the engine. If the cooling fan malfunctions, your vehicle’s engine will overheat. During an inspection of the cooling system service, our experts will check the cooling fan for damage and the fan belt for cracks. Because the radiator is responsible for cooling the antifreeze as it circulates throughout the cooling system, a leak or a broken radiator hose can lead to major engine failure. A radiator pressure test is one way we can check for potential leaks or radiator damage. Ultimately, neglecting basic cooling system and radiator maintenance can lead to a potential radiator replacement and major engine or radiator repairs down the road.

EXHAUST SYSTEM REPAIR

Depending upon the problem, the exhaust system can affect both your vehicle’s performance and your ability to drive. For these reasons, it is important to keep current with maintenance intervals on your exhaust system. A repair service or inspection may be impending if you hear excessively loud noises during acceleration. These noises may be a sign of holes or cracks somewhere in the exhaust system. Rattling noises when starting the vehicle or excessive idling may be a sign of failed or broken hangers. If you feel drowsiness while driving, this may be a serious sign that fumes are leaking through the vents and into the cabin interior. Sharp odors are also signs that noxious fumes are leaking into the vehicle. Signs of rust or cracks in any component of your exhaust system indicate corrosion. If you experience any of these symptoms, you should seek a service sooner than later. Maintaining routine exhaust system services will help keep all your exhaust components, like the exhaust manifold, front pipe, downpipe, catalytic converter, and muffler, working efficiently. Routine maintenance on your exhaust system will save you from having to replace the entire exhaust system down the road.

FOUR WHEEL DRIVE SYSTEM REPAIR

Smooth and consistent four wheel drive system performance is made possible through routine maintenance, which can vary from vehicle to vehicle and from system to system. This makes consulting your owner’s manual extremely important when it comes to scheduling services within the proper maintenance intervals. Rougher terrain can have a heavier impact on the life of your 4WD system. When scheduling 4WD maintenance, consider where you drive most often and how much time your vehicle spends traversing difficult terrain. Symptoms that show 4WD system repairs are needed include excessive noise while switching between gears, transfer case gear leaks and failures, unusual vibrations, and of course, a warning light on the dashboard. Whether you are in need of an inspection or repair, our staff is ready to help you with all aspects of 4WD maintenance.

LUBE, OIL & FILTER CHANGE

Over time, as oil becomes saturated with contaminants, excess particles are left behind in the engine, where they can form deposits and cause significant wear to the engine. Oversaturated oil loses its lubrication, which will eventually lead to an overworking engine, excess heat, and engine failure. Excessive heat can also lead to thermal breakdown in your engine oil, causing a change in the oil’s viscosity, and resulting in decreased oil flow. Similarly, dirty oil flows more slowly, causing the engine to work harder, leading to increased engine wear. Our service staff will inspect the oil filter during each oil change, and replace the oil filter in order to keep your oil clean from contaminants. Routine lube and oil changes will keep your engine running stronger and running longer. Contact us online or call us today regarding your next lube, oil, and filter change.

PREVENTIVE MAINTENANCE

Vehicle components and parts naturally wear out over time, and road hazards can negatively impact critical components. By adhering to the preventive maintenance schedule in your vehicle owner’s manual, you will help ensure that your vehicle always runs at optimal conditions. Depending upon the vehicle’s service interval mileage, our staff may inspect the function of your steering and suspension components, fluid filters, belts and hoses, brakes and axles, and more to help ensure that your vehicle functions efficiently. Our staff can look at the level of vital vehicle fluids. We are also able to review exterior and interior lights, examine windshield wiper blades, check batteries, inspect hinges and locks, determine level of ball joint wear, check transmission components, fix exhaust system components, and conduct both tire wear inspection and inflation checks. It is important to schedule preventive maintenance for these and other components to ensure they continue to work as intended. Remember that environmental conditions may affect your ideal preventive maintenance schedule. Depending upon your environment, you may need to seek more frequent inspections and replacements. Contact us today to learn more about recommended car maintenance service intervals for your vehicle.

STARTING, CHARGING & BATTERIES

Slow cranking engines and dim headlights can sometimes point to a problem with your vehicle’s starting and charging system. Because the battery is required for the electrical charge needed to start the rest of the electrical system, a weak or dead battery can also prevent your car from starting. If a jump start refuses to revive your battery and the starting system, our staff may need to take a closer look at the other components of the starting and charging system to determine whether or not you need a starter replacement or an alternator replacement. All components within your vehicle’s starting and charging system are necessary to ensure proper working order, and one bad link between them can render the entire electrical process useless. If you experience problems with starting your vehicle or maintaining its power even after trying a jump start, then allow our service staff to perform a starting and charging system check on your vehicle today.

STEERING AND SUSPENSION SYSTEM

Shaky, unsteady, off-center, and stiff steering are all cause for getting a steering system repaired, while excessive bouncing or swaying during bumps and intermittent control while driving and braking are cause for a suspension system inspection. Uneven tire wear is also a potential sign of a suspension problem, though this may also point to alignment issues. Have you hit a pothole recently? Potholes can cause damage to steering and suspension components. Worn suspension components will reduce the stability of the vehicle and the control of the driver. Because suspension system components combine into one working unit, suspension issues that go untreated have the potential to increase the wear on other suspension components, which may result in more extensive repairs down the road. If you experience any of the above symptoms, contact us online or by phone today.

TIRE PRESSURE MONITORING SYSTEM (TPMS)

Your vehicle’s Tire Pressure Monitoring System (TPMS) continuously monitors the air pressure in your tires. When there is an instance of low tire pressure, or if the tire pressure drops below the manufacturer’s recommended level of tire pressure, the TPMS will detect and report the discrepancy by illuminating an indicator light on the dashboard of your vehicle. When the TPMS light flashes on the dashboard, you should check your tire pressure, inflate the affected tire to the level indicated by the manufacturer, or bring your vehicle into our shop so that the issue can be remedied by our expert staff. During a TPMS maintenance service, our service staff will run a series of tests to ensure that the system is operating both correctly and at maximum efficiency. If our technicians uncover damage to the system or its accompanying components, they may need to replace valve cores, valve nuts, seals, seal washers, or valve caps. If you are in need of TPMS repairs, maintenance, or replacement services, or if you are in need of a TPMS installation service, then contact us today.

TIRE SERVICES

Premature tire wear is caused by poor tire inflation levels and improper tire rotation. Whereas correctly inflated tires tend to have durable sidewalls, underinflated tires often have flexible sidewalls that result in quicker sidewall wear. Overinflated tires are also undesirable and will result in excessive center tread wear. Wheel balancing has the potential to relieve some symptoms of improper tire wear, like excessive lean. However, improper tire wear may also be the cause of alignment issues. During any tire repair service, our staff will be able to determine whether a tire balancing or rotation service can solve your current set of issues. Because tire inflation is so important, our staff will take care to follow the inflation standards recommended by the manufacturer during a new tire installation. Overall, proper tire inflation can lead to reduced tread movement, increased water dissipation, reduced rolling resistance, proper traction, and adequate load carrying capabilities. Our tire service work promotes better fuel economy and longer tread life.

TRANSMISSION REPAIR

A faulty transmission can negatively affect your vehicle’s performance. Symptoms of an impending transmission service include grinding gears, difficulty shifting, slipping out of gear, bucking, and hesitation. Even if your transmission is in neutral, excessive noise is a sign of transmission problems. In a manual transmission, a dragging clutch, or a clutch failing to disengage from the flywheel, is another sign of transmission issues. When this occurs, the clutch continues to spin with your vehicle’s engine, and a grinding noise will occur. A burning smell sifting through the air vents is a sign of burning transmission fluid and an overheating transmission. Things that can negatively impact the life of your transmission include extreme driving habits, and excessive loads or heavy towing habits. Because of the necessary pressure and force provided by transmission fluid in automatic transmissions, old, dirty, and unchanged transmission fluid can cause performance issues. Regular transmission maintenance as indicated by your vehicle’s manufacturer can help prevent transmission problems, but if you experience any of the above warning signs of transmission trouble, contact us today about transmission repair.

VEHICLE INSPECTION

An inspection can identify potential vehicular problems early and save you time and money down the road as a result. We are equipped to handle a variety of vehicle inspections. During every inspection, our service staff uses a series of quality checkpoints to determine whether your vehicle should be deemed safe for highway operation. If your vehicle happens to fail a quality checkpoint during the inspection process, you may be entitled to a retest depending on the guidelines that regulate vehicle inspections in your area. If you have questions about our vehicle inspection certification or licensing, or if you are ready to schedule an inspection, please contact us online or by phone.

WHEEL SERVICES

There are many reasons to shop for new wheels for your car or truck. You might be looking to increase steering response or improve the handling of your vehicle, or you might be looking to improve the appearance of your car or truck. Whether you are in the market for a set of new wheels due to recent driving damage or you simply want to switch up your driving capabilities, we have a variety of wheels and rims available for purchase and installation. We carry a wide selection of wheel brands, sizes, and styles for passenger cars, trucks, and SUVs. Whatever we do not have available in our current inventory, we will special order upon request. All mounting and balancing will be done by our detail-oriented team of auto experts. When you are in the market for a new set of wheels, our staff will be happy to discuss the difference between bolt patterns and offsets, and the advantages and disadvantages of choosing steel, aluminum, or alloy wheels.

  • Axle, CV Joint and Driveshaft Repair
  • Belts and Hoses
  • Brake Repair
  • Cooling System Repair
  • Exhaust System Repair
  • Four Wheel Drive Repair
  • Lube, Oil and Filter Change
  • Preventive Maintenance
  • Starting, Charging and Batteries
  • Steering and Suspension System
  • Tire Pressure Monitoring System (TPMS)
  • Tire Services
  • Transmission Repair
  • Vehicle Inspections
  • Wheel Services